Login
Dont have an account?
RegisterReset Password
We will email you a reset link
Already have an account?
Login
- Home
- Shop by Range
- Site & Workshop
- Raw Material
- Ground Flat Stock
- Stubs GFS 18" Long Imperial Ground Flat Stock
Stubs GFS 18" Long Imperial - Ground Flat Stock
Available for Collection or Delivery
Store Pickup
Collect
Fri Jan 3
rdFREE
Standard
As soon as
Mon Jan 6
thFREE
Pre-Noon
As soon as
Mon Jan 6
th£10.00
Pre-10:30am
As soon as
Mon Jan 6
th£15.00
Pre-9:00am
As soon as
Mon Jan 6
th£30.00
In Stock
Product Description
Supplied in precision-ground stock sizes. Exhibits a low dimensional movement during hardening. Suitable for a wide variety of cold work tooling & other applications where a combination of reasonable life & cost is involved. Decarburisation-free in the fully annealed condition with a hardness of 229 HB maximum. TOLERANCES: ImperialMetric. Thickness+0.001"+0.050 mm. -0.000"-0.000 mm. Width+0.05"+0.20 mm. -0.00"-0.00 mm. HEAT TREATMENT. Hardening -. Heat uniformly to 780/820C depending on bulk. Equalise at temperature, then oil quench to hand warmth. Temper immediately. The 'interrupted quench' method of hardening is recommended as a means of minimising the possibility of stress cracking or excessive distortion developing during oil quenching. This involves quenching from the standard hardening temperature into a salt bath held at 180/200C, equalising at this temperature, & then air cooling to room temperature. After boiling off the adherent salt, tempering is carried out in the normal way. Tempering -. Temper as soon as possible after hardening, allowing at least 11/2 hours at temperature. In practice, tempering is normally carried out in the range 150-220C. Applications. Gauges. Blanking & forming dies. Guide plates. Cams. Templates. Shear blades. Punches. Slitting cutters. Press tools. Machine wear parts etc. Further processing of this material could lead to exposure to substances, which may present a health hazard. Therefore effective, local dust / fume extraction must be used. All Ground Flat Stock is 18" in length.
Features
- Supplied in precision-ground stock sizes
- Exhibits a low dimensional movement during hardening
- Suitable for a wide variety of cold work tooling & other applications where a combination of reasonable life & cost is involved
- Decarburisation-free in the fully annealed condition with a hardness of 229 HB maximum
TOLERANCES:
Imperial Metric
Thickness +0.001" +0.050 mm
-0.000" -0.000 mm
Width +0.05" +0.20 mm
-0.00" -0.00 mm
HEAT TREATMENT
Hardening -
Heat uniformly to 780/820C depending on bulk. Equalise at temperature, then oil quench to hand warmth. Temper immediately.
The ''interrupted quench'' method of hardening is recommended as a means of minimising the possibility of stress cracking or excessive distortion developing during oil quenching.
This involves quenching from the standard hardening temperature into a salt bath held at 180/200C, equalising at this temperature, & then air cooling to room temperature.
After boiling off the adherent salt, tempering is carried out in the normal way.
Tempering -
Temper as soon as possible after hardening, allowing at least 11/2 hours at temperature.
In practice, tempering is normally carried out in the range 150-220C.
Applications
- Gauges
- Blanking & forming dies
- Guide plates
- Cams
- Templates
- Shear blades
- Punches
- Slitting cutters
- Press tools
- Machine wear parts etc.
Further processing of this material could lead to exposure to substances, which may present a health hazard.
Therefore effective, local dust / fume extraction must be used.
All Ground Flat Stock is 18" in length.