| STARRETT POWERBAND CONSTANT PITCH BANDSAW BLADES |
|---|
| | WIDTH x THICKNESS | TOOTH | TOOTH |
|---|
| ITEM | LENGTH | METRIC | IMPERIAL | PER INCH | TYPE |
|---|
| IT | 1" x .035 | 25 x .90 | 9'4" 4-6tpi | 4-6 TPI | Varipitch |
| IT | 1" x .035 | 25 x .90 | 9'4" 6-10tpi | 6-10 TPI | Varipitch |
| IT | 1" x .035 | 25 x .90 | 10'6" 5-8tpi | 5-8 TPI | Varipitch |
| IT | 1" x .035 | 25 x .90 | 10'6"6-10tpi | 6-10 TPI | Varipitch |
| IT | 1" x .035 | 25 x .90 | 11'0"6-10tpi | 6-10 TPI | Varipitch |
| IT | 1" x .035 | 25 x .90 | 11'9"6-10tpi | 6-10 TPI | Varipitch |
| IT | 1" x .035 | 25 x .90 | 12'0" 5-8tpi | 5-8 TPI | Varipitch |
| IT | 1" x .035 | 25 x .90 | 12'0"6-10tpi | 6-10 TPI | Varipitch |
| IT | 1" x .035 | 25 x .90 | 12'6" 4-6tpi | 4-6 TPI | Varipitch |
| IT | 1" x .035 | 25 x .90 | 12'6" 5-8tpi | 5-8 TPI | Varipitch |
| IT | 1" x .035 | 25 x .90 | 12'6"6-10tpi | 6-10 TPI | Varipitch |
| IT | 1" x .035 | 25 x .90 | 12'6"1014tpi | 10-14 TPI | Varipitch |
| IT | 1.1/4" x.042 | 32 x 1.10 | 14'6" 4-6tpi | 4-6 TPI | Varipitch |
rake variable pitch. Matrix ll high speed steel edge. Reduced noise & vibrations. For cutting of solids, structurals & pipe. Faster cutting rates over wide range of materials in production cut-off on heavy duty horizontal band saws. Can be used on vertical band saws for cutting small radii in hard-to-machine die steels. Keep their edge in long-run, intricate contouring jobs.
- rake variable pitch
- Matrix ll high speed steel edge
- Reduced noise & vibrations
- For cutting of solids, structurals & pipe
- Faster cutting rates over wide range of materials in production cut-off on heavy duty horizontal band saws
- Can be used on vertical band saws for cutting small radii in hard-to-machine die steels
- Keep their edge in long-run, intricate contouring jobs
rake variable pitch. Matrix ll high speed steel edge. Reduced noise & vibrations. For cutting of solids, structurals & pipe. Faster cutting rates over wide range of materials in production cut-off on heavy duty horizontal band saws. Can be used on vertical band saws for cutting small radii in hard-to-machine die steels. Keep their edge in long-run, intricate contouring jobs.
